ALPMAC B 220-4100 press brake
Niederlangen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
chamfer lenght 4100 mm
distance between columns 3600 mm
column arm 410 mm
ram stroke speed 150 mm/sec
work speed 10.0 mm/sec
return speed 140 mm/sec
work stroke 265 mm
dayligth 480 mm
table height 900 mm
table width 110 mm
oil volume 300 ltr.
voltage 400 Volt
total power requirement 18.5 kW
weight 15000 kg
range L-W-H 5000 x 2400 x 2850 mm
ALPMAC Manufacturer Video:
show contacts
show contacts
ALPMAC Product Video Model B:
show contacts
---------------------------------------------------------
MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with:
* increased installation height
* increased cylinder stroke
* increased throat depth
--------------------------------------------------------
! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52)
! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY)
! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB)
! INDUCTION-HARDENED + CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE
! ALUMINUM CAST REAR STOP COMPONENTS
! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW)
! MACHINE TABLE MADE OF ROBUST + DURABLE STEEL (C45)
GREEN ECO Technology: Lower consumption. More quiet. Full control.
! Peak performance with minimal energy consumption
! Maximum power at minimal cost
! Maximum performance when it's really needed
! Main motor is only activated by the foot pedal
! No energy wasted in standby mode
! Controlled start-up process
Equipment:
- CNC electro-hydraulic press brake
- DELEM CNC control model DA-66T- graphics/touchscreen
* 2D graphic touchscreen programming operation
* 3D display in simulation and production
* 17" high-resolution color TFT screen
* Bending sequence calculation
* Product programming and display in actual size
* USB interface
- CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning
- CNC electro-motorized backgauge (X-axis)
* on ball screws
* Travel: max. 750 mm
* X-axis travel speed: 350 mm/s
* with 2x CNC-controlled backgauge fingers
- CNC electro-motorized height adjustment (R-axis)
* Travel: max. 250 mm
* R-axis travel speed: 300 mm/s
- CNC electro-motorized table crowning
- ROLLERI Rehfuss upper tool "PS 135.85-R08", System "A"
* including quick-change clamping
* including crowning device in the tool holder
- ROLLERI split universal die block "M 460 R"
* including 1x die shoe "C 1050-R"
- Rear safety device: light barrier
- HAWE hydraulic components
- FIESSLER AKAS laser safety device in front of the machine (incl. FPSC)
- 2x front support arms with sliding system
* easily and keylessly height-adjustable
- FIESSLER freely movable double foot control
- CE marking / Declaration of Conformity
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.