OSTAS OPK 45 digi manual pipe bender for sale by auction
≈ $3,896
Velen-Ramsdorf
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
- Foot pedal right/counterclockwise rotation
- Mount: Shaft 50mm
- With digital display
- Hardened special steel shafts
- 1 set of standard rollers
- 2 driven rollers
- Top roller can be hydraulically fed up and down
- Horizontal and vertical operation
- Motor with brake device
Round material solid 35 (600) mm
Square material solid 35 (900) mm
Angle steel 50 x 50 x 5 (800) mm
T - Steel - Bridge Outside 60 x 7 (600) mm
Axle diameter 50 mm
Working speed 4.5 m/min
Total power requirement 1.5 kW
Machine weight approx. 0.4 t
Space requirement approx. 1.1 x 0.8 x 1.5 m
Condition: never used / new (5)
- Fusspedal Rechts/Linkslauf
- Aufnahme: Welle 50mm
- mit Digitalanzeige
- gehaertete Spezialstahlwellen
- 1 Satz Standardwalzen
- 2 angetriebene Rollen
- Oberwalze auf und ab hydraulisch zustellbar
- Horizontale und vertikale Arbeitsweise
- Motor mit Bremseinrichtungg
Rundmaterial massiv 35 (600) mm
Vierkantmaterial massiv 35 (900) mm
Winkelstahl 50 x 50 x 5 (800) mm
T - Stahl - Steg nach außen 60 x 7 (600) mm
Achsendurchmesser 50 mm
Arbeitsgeschwindigkeit 4,5 m/min
Gesamtleistungsbedarf 1,5 kW
Maschinengewicht ca. 0,4 t
Raumbedarf ca. 1,1 x 0,8 x 1,5 m
Zustand: nie benutzt / neu (5)
Profilbiegemaschine mit: Fusspedal Rechts/Linkslauf - Aufnahme: Welle 50mm - mit Digitalanzeige - gehaertete Spezialstahlwellen - 1 Satz Standardwalzen - 2 angetriebene Rollen - Oberwalze auf und ab hydraulisch zustellbar - Horizontale und vertikale Arbeitsweise - Motor mit Bremseinrichtungg Rundmaterial massiv 35 (600) mm Vierkantmaterial massiv 35 (900) mm Winkelstahl 50 x 50 x 5 (800) mm T - Stahl - Steg nach außen 60 x 7 (600) mm Achsendurchmesser 50 mm Arbeitsgeschwindigkeit 4,5 m/min Gesamtleistungsbedarf 1,5 kW Maschinengewicht ca. 0,4 t Raumbedarf ca. 1,1 x 0,8 x 1,5 m Zustand: nie benutzt / neu (5)
Marke: OSTAS
Länge: 1100
Höhe: 1500
Breite: 800
- Pedal a la derecha / rotación en sentido contrario a las agujas del reloj
- Montaje: Eje 50mm
- Con pantalla digital
- Ejes de acero especial endurecido
- 1 juego de rodillos estándar
- 2 rodillos accionados
- El rodillo superior se puede alimentar hidráulicamente hacia arriba y hacia abajo
- Operación horizontal y vertical
- Motor con dispositivo de freno
Material redondo macizo 35 (600) mm
Material cuadrado macizo 35 (900) mm
Ángulo de acero 50 x 50 x 5 (800) mm
T - Acero - Puente exterior 60 x 7 (600) mm
Diámetro del eje 50 mm
Velocidad de trabajo 4,5 m/min
Potencia total requerida 1,5 kW
Peso de la máquina aprox. 0,4 t
Requisitos de espacio aprox. 1,1 x 0,8 x 1,5 m
Condición: nunca usado / nuevo (5)
- Jalkapoljin oikealle/vastapäivään pyörii
- Kiinnitys: Akseli 50mm
- Digitaalisella näytöllä
- Karkaistut erikoisteräsakselit
- 1 sarja vakiorullia
- 2 veettävää rullaa
- Ylärullaa voidaan syöttää hydraulisesti ylös ja alas
- Vaaka- ja pystysuuntainen käyttö
- Moottori jarrulaitteella
Pyöreä materiaali kiinteä 35 (600) mm
Neliönmuotoinen materiaali kiinteä 35 (900) mm
Kulmateräs 50 x 50 x 5 (800) mm
T - Teräs - Silta ulkopuolelta 60 x 7 (600) mm
Akselin halkaisija 50 mm
Työnopeus 4,5 m/min
Kokonaistehontarve 1,5 kW
Koneen paino n. 0,4 t
Tilantarve n. 1,1 x 0,8 x 1,5 m
Kunto: ei koskaan käytetty / uusi (5)
- Pédale de rotation à droite/dans le sens inverse des aiguilles d’une montre
- Monture : Arbre 50mm
- Avec affichage numérique
- Arbres en acier spécial trempé
- 1 jeu de rouleaux standard
- 2 rouleaux entraînés
- Le rouleau supérieur peut être alimenté hydrauliquement vers le haut et vers le bas
- Fonctionnement horizontal et vertical
- Moteur avec dispositif de freinage
Matériau rond solide 35 (600) mm
Matériau carré plein 35 (900) mm
Angle en acier 50 x 50 x 5 (800) mm
T - Acier - Pont extérieur 60 x 7 (600) mm
Diamètre de l’essieu 50 mm
Vitesse de travail 4,5 m/min
Puissance totale requise 1,5 kW
Poids de la machine env. 0,4 t
Encombrement : env. 1,1 x 0,8 x 1,5 m
État : jamais utilisé / neuf (5)
- Rotazione del pedale a destra/antiorario
- Montaggio: albero 50 mm
- Con display digitale
- Alberi in acciaio speciale temprato
- 1 set di rulli standard
- 2 rulli motorizzati
- Il rullo superiore può essere alimentato idraulicamente su e giù
- Funzionamento orizzontale e verticale
- Motore con dispositivo di frenatura
Materiale rotondo pieno 35 (600) mm
Materiale quadrato solido 35 (900) mm
Angolo acciaio 50 x 50 x 5 (800) mm
T - Acciaio - Ponte esterno 60 x 7 (600) mm
Diametro dell'asse 50 mm
Velocità di lavoro 4,5 m/min
Potenza totale richiesta 1,5 kW
Peso della macchina circa 0,4 t
Ingombro circa 1,1 x 0,8 x 1,5 m
Condizione: mai usato / nuovo (5)
- Voetpedaal rechts/tegen de klok in draaien
- Bevestiging: As 50mm
- Met digitaal display
- Geharde assen van speciaal staal
- 1 set standaard rollen
- 2 aangedreven rollen
- Bovenrol kan hydraulisch op en neer worden gevoed
- Horizontale en verticale bediening
- Motor met reminrichting
Rond materiaal massief 35 (600) mm
Vierkant materiaal massief 35 (900) mm
Hoek staal 50 x 50 x 5 (800) mm
T - Staal - Brug Buiten 60 x 7 (600) mm
Diameter as 50 mm
Werksnelheid 4,5 m/min
Totaal benodigd vermogen 1,5 kW
Gewicht van de machine ca. 0,4 t
Benodigde ruimte: ca. 1,1 x 0,8 x 1,5 m
Staat: nooit gebruikt / nieuw (5)
- Obrót pedału nożnego w prawo/przeciwnie do ruchu wskazówek zegara
- Mocowanie: wałek 50mm
- Z cyfrowym wyświetlaczem
- Hartowane wały ze stali specjalnej
- 1 zestaw standardowych rolek
- 2 napędzane rolki
- Górna rolka może być hydraulicznie podawana w górę i w dół
- Praca w poziomie i pionie
- Silnik z urządzeniem hamującym
Materiał okrągły pełny 35 (600) mm
Materiał kwadratowy pełny: 35 (900) mm
Kątownik stalowy 50 x 50 x 5 (800) mm
T - Stal - Mostek zewnętrzny 60 x 7 (600) mm
Średnica osi 50 mm
Prędkość robocza 4,5 m/min
Całkowite zapotrzebowanie mocy 1,5 kW
Masa maszyny ok. 0,4 t
Wymagane miejsce ok. 1,1 x 0,8 x 1,5 m
Stan: nigdy nie używany / nowy (5)
- Pedala de picior cu rotație dreapta/în sens invers acelor de ceasornic
- Montare: Arbore 50mm
- Cu afișaj digital
- Arbori din oțel special călit
- 1 set de role standard
- 2 role acționate
- Rola superioară poate fi alimentată hidraulic în sus și în jos
- Funcționare orizontală și verticală
- Motor cu dispozitiv de frânare
Material rotund solid 35 (600) mm
Material pătrat solid 35 (900) mm
Oțel unghiular 50 x 50 x 5 (800) mm
T - Oțel - Pod exterior 60 x 7 (600) mm
Diametrul axei 50 mm
Viteza de lucru 4,5 m/min
Putere totală necesară: 1,5 kW
Greutatea mașinii aproximativ 0,4 t
Spațiu necesar: aproximativ 1,1 x 0,8 x 1,5 m
Stare: niciodată folosit / nou (5)
- Fotpedal höger/rotation moturs
- Fäste: Skaft 50mm
- Med digital display
- Skaft i härdat specialstål
- 1 uppsättning standardrullar
- 2 drivna rullar
- Topprullen kan matas hydrauliskt upp och ner
- Horisontell och vertikal drift
- Motor med bromsanordning
Runt material, massivt 35 (600) mm
Fyrkantsmaterial, massivt 35 (900) mm
Vinkelstål 50 x 50 x 5 (800) mm
T - Stål - Brygga utvändig 60 x 7 (600) mm
Axeldiameter 50 mm
Arbetshastighet 4,5 m/min
Totalt effektbehov 1,5 kW
Maskinens vikt ca 0,4 t
Utrymmesbehov ca 1,1 x 0,8 x 1,5 m
Skick: aldrig använd / ny (5)