Workshop equipment ATEX RUST slipemaskiner sander for sale by auction
≈ ZWL 195,100
Aabenraa
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€8.50
NOK 100
≈ ZWL 3,198
Denmark, Aabenraa
€13.38
DKK 100
≈ ZWL 5,033
6.4 m
Denmark, Aabenraa
€9,500
SEK 102,000
≈ ZWL 3,573,000
37,720 kg
Net weight
48,900 kg
Denmark, Aabenraa
€8,675
NOK 102,000
≈ ZWL 3,262,000
35,410 kg
Denmark, Aabenraa
€13.38
DKK 100
≈ ZWL 5,033
Denmark, Aabenraa
€35,860
SEK 385,000
≈ ZWL 13,490,000
Denmark, Aabenraa
€2,142
SEK 23,000
≈ ZWL 805,600
Denmark, Aabenraa
€8.50
NOK 100
≈ ZWL 3,198
Denmark, Aabenraa
General conditions
Sales commission is included in your bid. Auction charges and VAT is added when applicable.
Payment charges (kr 250,- / EUR 25) will be added.
All invoices have 5 days payment terms.
Payment must be registered before seller can be contacted for collection of purchased items
All purchases must be collected within 21 days. NOTE! We expect buyer and seller to cooperate on arranging collection according to the current restrictions and instructions from the authorities.
An agreement MUST be made with the seller prior to collection
The auction item is approved bu the buyer at collection.
The buyer is responsible for all costs with regards to pick up, transport and export.
NOTE! Objects sold for export must be collected by a registered freight forwarder/hauler. CMR documentation must be provided to the seller upon delivery of the objects.
Click here
for an offer for transport!
Overall condition: Object(s) working satisfactory when last used
Seller / Auction broker: Aker Solutions AS
Location: Kvernelandsveien 128, Sandnes, 4323, Norway
brand: ATEX RUST slipemaskiner
5 stk. pneumatiske (luftdrevne) RUST™ slipemaskiner
hvorav 4 stk. er rettslipere (freser) selges. I tillegg følger et utvalg av slipebits
freser og tilbehør som dekker de fleste behov for overflatebehandling. Alt utstyret leveres ryddig og godt beskyttet i robuste Peli-kofferter
noe som sikrer trygg lagring og enkel transport – ideelt for krevende arbeidsmiljøer
Viktig: Utstyret selges kun samlet
ingen enkeltsalg
RUST™ er en profesjonell serie slipemaskiner utviklet for sikker og effektiv overflatebehandling i eksplosjonsfarlige miljøer. Maskinene er ATEX-sertifisert som "kaldt arbeid"-verktøy
noe som betyr at de kan brukes uten behov for brannvakt
varme arbeidstillatelser eller habitat. Dette gir betydelige fordeler i offshore-industrien
prosessanlegg og andre områder med strenge HMS-krav
Bruksområder
Maskinene er konstruert for rask og effektiv fjerning av
Rust og korrosjon
Coating
maling
bitumen
chartek m.m
Sveis
sveisesprut og grov overflateruhet
Ulike typer forurensning som salt og skitt
Med RUST™-systemet oppnår du høy effektivitet
lav vibrasjon
redusert støy og svært god overflateruhet og renhet – perfekt som forarbeid før inspeksjon
ny coating eller reparasjoner
Praktisk informasjon
Spørsmål eller ønske om besiktigelse sendes til: show contacts
Kjøper må avhente materiell senest 14 dager etter betaling
Maskinene ble sendt til service hos underleverandør etter siste gangs bruk og ikke brukt etter dette
men på grunn av tiden som har gått kan dagens tekniske tilstand ikke garanteres. Utstyret selges derfor “som det er”
Kjøper må hente utstyret hos selger eller arrangere annen form for opphenting
For sale are 5 RUST™ pneumatic (air-driven) grinders
4 of which are straight grinders (milling machines). In addition
a selection of grinding bits
milling machines
and accessories are included that cover most surface treatment needs. All the equipment is neatly and well protected in robust Peli cases
ensuring secure storage and easy transport - ideal for demanding work environments
Important: The equipment is only sold as a set
no individual sales
RUST™ is a professional range of grinders developed for safe and effective surface treatment in explosive environments. The machines are ATEX-certified as "cold work" tools
which means they can be used without the need for a fire watch
hot work permits
or habitats. This offers significant advantages in the offshore industry
process plants
and other areas with strict HSE requirements
Applications
The machines are designed for quick and efficient removal of
Rust and corrosion
Coatings
paint
bitumen
chartek
etc
Welds
welding splatter
and coarse surface roughness
Various types of pollutants such as salt and dirt
With the RUST™ system
you achieve high efficiency
low vibration
reduced noise
and excellent surface smoothness and cleanliness - perfect for preparatory work before inspection
new coating
or repairs
Practical information
Questions or requests for viewing should be sent to: show contacts
The buyer must collect the materials no later than 14 days after payment
The machines were sent for service to a subcontractor after last use and have not been used since. However
due to the time that has passed
the current technical condition cannot be guaranteed. Therefore
the equipment is sold "as is"
The buyer must collect the equipment from the seller or arrange another form of collection