Sany SYM5350THB 60C-10 on chassis Mercedes-Benz concrete pump

1、The operation range is wide

Lightweight technology： Achieve a weight loss of 10%， “Under the law” Long boom pump truck

2、Low fuel consumption

·Casting energy-saving main valve： Response and commutation speed increase 20%, Commutation impact drops 10%， Service life of hydraulic parts increased by 50%。

·Engine power self-matching： Pumping displacement and engine speed、Power、Adaptive adjustment of torque and fuel injection quantity， and dynamically and reasonably match the rotating speed of the engine according to the load change. The engine always operates in an economical and fuel-efficient area.。

3、High efficiency

·Suction is fast: The mount angle of that pumping system is Chan from the conventional 10.-11 degrees, Optimized to 8 degrees, Improved suction efficiency by 10%, Measured up to 95.2%。

·The cloth is fast: New 6RZFolding boom

4、Safe

·External linkage、Through shaft structure: The rigidity of the connecting end of the boom is stronger. With better handling, rotational swing amplitude is reduced by 20%. Above, the amplitude of the end vibration can be controlled at±20cm。

·Through-shaft structure for connecting the rotary table and arm support: Better connection rigidity, and is favorable for shock absorption and anti-swing of the arm support.。

·New and optimized duct support: Stress at each point is less than 100MPa, with no cracking。

·The reducer is equipped with a plunger motor: More accurate rotary positioning, Safer and more reliable control, Accuracy increased by 0.7-1.5x。

·Omni-directional online monitoring: Reversing camera、Reverse image

5、Intelligence

·Digital cylinder: The stroke utilization rate of the master cylinder can reach 99.5%, realizing adaptive correction of stroke、Intelligent fault diagnosis。

·Cell phone APP Sany Customer Cloud

Device location information can be viewed in real time on the mobile terminal, Driving path.

Equipment working condition、Fuel consumption、Pumping working hours, Basic parameters such as standby time；

It can actively warn and prompt of the abnormal operation of the equipment.
For example, the chassis water temperature is high, High pumping oil temperature, Early warning and prompting functions such as abnormal pressure impact in the pumping state；

Function of electronic fence： Set the safety area for equipment driving, cross the safe area for active warning prompt.

Proactive tips for equipment maintenance, Uch as replacing the delivery tube、Concrete piston, etc。

·Fuel consumption management system

Daily fuel consumption of equipment can be viewed in real time, including Fuel consumption of pumping cubic meters, Refueling time, etc.

Self-diagnosing the health status of engine fuel consumption, High fuel consumption state prewarning of the engine;

Send the equipment refueling information to the customer's mobile phone。

6、And is easy to maintain

·Lubrication-free bearing: Lubrication-free rear leg, No maintenance required; The lubrication cycle of the boom pin shaft is prolonged by more than two times。

·Lightweight hollowed-out structure turntable: Lighter weight, provides more space for the maintenance of delivery pipes and hydraulic pipelines。

·C10 Use spigot+ Installation of bolt-connected concrete piston: Replacement time of concrete piston is about 35 minutes, save 20 minutes