Keyence 3D_Digi_XM2018_Bj.1 coordinate measuring machine
Geislingen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 1516 15...
Show
+49 1516 1553657
+49 7428 91...
Show
+49 7428 9188869
Germany 
Germany, Dusseldorf
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Location:dortmund
Germany, Pullach
Germany, Berlin
Germany, Dortmund
Germany, Pullach
Germany, Pullach
Coordinate measuring machine parts
Betriebsstunden: nicht bekannt
Gebr. KEYENCE_Modellreihe XM_(T2000- muss noch geprüft werden) Bj.2018
Messgerät
Messbereich: 300 mm × 250 mm × 150 mm
Kleinste Anzeigeeinheit: Abstand 1 µm / Winkel 0,0001 Grad
Messgenauigkeit:
Wiederholgenauigkeit: ±3 μm
Messabweichung: ±8 μm
Objekttisch
Maximale Gewichtsbelastung: 25 kg
Messtaster: 2
Eingebautes Display: 15-Zoll-LCD-Monitor (1024 × 768)
Schnittstellen: USB 2.0 Serie A: 3 Anschlüsse
Umgebungsbeständigkeit: +10 bis +35°C
Unter Bezugnahme auf ISO 10360-2
(innerhalb eines Bereichs von 200 × 200 × 150 mm bei einer Umgebungstemperatur im Betrieb von 23 ±1°C)
Steuergerät XM-1600
Messtaster: XM-P2000
Funktionen:
Einstellmodus, Bildgeführte Messung, Statistik und Analyse, Einzelmessung
500 (ohne Kommentar-Elemente)
Grundlegende Messung: Abstand, Winkel, Berechnung, CAD-Abstand
Ebene, Gerade, Punkt, Kreis, Zylinder, Kegel, Kugel
Punkt – keine Korrektur, Ellipse, Punktkreis, Abgestufter Zylinder, Oval, Langloch,
Eckenradius, Fase, Torus, CAD-Vergleich, Freiformfläche
Konstruktion: Mittelpunkt, Tangentenpunkt, Schnittpunkt, Lot, Numerische Eingabe,
Elementauswahl, Mittellinie, Tangente, Schnittlinie, Projektionslinie, Rotationslinie, Numerische Eingabe, Elementauswahl, Mittelebene, Parallelebene, Numerische Eingabe, Elementauswahl, Schnittkreis, Numerische Eingabe, Elementauswahl.
Prüfspezifikationen, Einzelobjektbericht, Einzelobjektbericht (mit Bauteilbild),
Bildschirmbild, Grafikanzeigenbild, Bild von der Messtaster-Kamera, CSV-Ausgabe
Abmessungen Maschine: ca. 900 x 500 x 1000 [mm]
Gewicht Maschine: ca. 30 [kg]
Abmessungen Maschine: ca. 400 x 300 x 600 [mm]
Gewicht Maschine: ca. 6 [kg]
Die Maschine kann nach Terminvereinbarung Strom besichtigt werden.
Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!
Used. KEYENCE_Model series XM_(T2000- still to be checked) Year 2018
Measuring device
Measuring range: 300 mm × 250 mm × 150 mm
Smallest display unit: Distance 1 µm / angle 0.0001 degrees
Measuring accuracy:
Repeatability: ±3 μm
Measurement deviation: ±8 μm
Object table
Maximum weight load: 25 kg
Measuring probe: 2
Built-in display: 15-inch LCD monitor (1024 × 768)
Interfaces: USB 2.0 Series A: 3 ports
Environmental resistance: +10 to +35°C
With reference to ISO 10360-2
(within an area of 200 × 200 × 150 mm at an operating ambient temperature of 23 ±1°C)
Control unit XM-1600
Measuring probe: XM-P2000
Functions:
Setting mode, image-guided measurement, statistics and analysis, single measurement
500 (without comment elements)
Basic measurement: Distance, angle, calculation, CAD distance
Plane, straight line, point, circle, cylinder, cone, sphere
Point - no correction, ellipse, point circle, stepped cylinder, oval, slotted hole,
corner radius, chamfer, torus, CAD comparison, free-form surface
Construction: Center point, tangent point, intersection point, perpendicular, numerical input,
Element selection, center line, tangent, intersection line, projection line, rotation line, numerical input, element selection, center plane, parallel plane, numerical input, element selection, intersection circle, numerical input, element selection
Test specifications, individual object report, individual object report (with component image),
Screen image, graphic display image, image from the touch probe camera, CSV output
Machine dimensions: approx. 900 x 500 x 1000 [mm]
Machine weight: approx. 30 [kg]
Machine dimensions: approx. 400 x 300 x 600 [mm]
Machine weight: approx. 6 [kg]
The machine can be inspected by appointment.
Changes and errors in the technical data and information as well as prior sale reserved!