Homag PROFI BMG 511/60/12/R machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Working area: 6,000 x 1,550 mm
Workpiece parameters:Length (single setup): 6,000 mmLength (pendulum operation): 1,550–3,200 mmWidth: max. 1,550 mm (with rear stop and milling cutter Ø25 mm)Workpiece thickness: up to 275 mm including clamping devices; up to 60 mm with standard clamping equipment
Length (single setup): 6,000 mm
Length (pendulum operation): 1,550–3,200 mm
Width: max. 1,550 mm (with rear stop and milling cutter Ø25 mm)
Workpiece thickness: up to 275 mm including clamping devices; up to 60 mm with standard clamping equipment
Speed Pack: X-axis maximum feed 80 m/min
X-axis speed: 80 m/min
Tooling:Tool transfer station on left side of machine bedDisc-type tool changer: 18 positionsCapacity options: 18 x Ø130 mm tools, or 9 x Ø180 mm + 9 x Ø70 mm toolsMax aggregate length: 320 mmNo tools included
Tool transfer station on left side of machine bed
Disc-type tool changer: 18 positionsCapacity options: 18 x Ø130 mm tools, or 9 x Ø180 mm + 9 x Ø70 mm toolsMax aggregate length: 320 mm
Capacity options: 18 x Ø130 mm tools, or 9 x Ø180 mm + 9 x Ø70 mm tools
Max aggregate length: 320 mm
No tools included
Main milling spindle:12 kW (S6) / 9.5 kW (S1)Frequency-controlled 0–24,000 rpm
12 kW (S6) / 9.5 kW (S1)
Frequency-controlled 0–24,000 rpm
C-axis:With aggregate interface; unlimited swivel rangeInterface for FLEX-5 aggregate (aggregate not included)
With aggregate interface; unlimited swivel range
Interface for FLEX-5 aggregate (aggregate not included)
Drilling head (30 spindles) – V20 / H10 / S360° “MPU”:C-axis ±185° for drilling/sawing at any angle20 vertical high-speed spindles with quick-changeVertical spindle layout (U-shape): 3 rows with 11, 3, and 6 spindles, 32 mm spacing10 horizontal spindles: 4 pairs at 32 mm spacing; 1 pair at 320 mm spacing
C-axis ±185° for drilling/sawing at any angle
20 vertical high-speed spindles with quick-change
Vertical spindle layout (U-shape): 3 rows with 11, 3, and 6 spindles, 32 mm spacing
10 horizontal spindles: 4 pairs at 32 mm spacing; 1 pair at 320 mm spacing
Grooving/separation saw: for blade diameters up to Ø200 mm
Table/base:Grid table with slotted aluminum profileDynamic table area allocation (R-table): automatic part size check; vacuum zones permanently assigned to machining fields
Grid table with slotted aluminum profile
Dynamic table area allocation (R-table): automatic part size check; vacuum zones permanently assigned to machining fields
Control/software:POWERCONTROL PC 86 POWERTOUCH21.5" Full HD multi-touch displayWoodWop graphical, dialog-based CNC programming
POWERCONTROL PC 86 POWERTOUCH
21.5" Full HD multi-touch display
WoodWop graphical, dialog-based CNC programming
Vacuum: Supplied via customer-side vacuum system (no integrated vacuum pump)
application type: CNC Wood Machining
Location: Germany
machine type: CNC Processing Center