Matsuura ES-450HII PC5 machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Table surface height (from the floor): 1000mm
Traverses: X axis (column right/left): 450mm (250 on the left, 200 on the right) Y axis (spindle head up/down): 400mm Z axis (pallet back/forth): 400mm (+250 when pallet is changed) Workpiece Distance between pallet top surface to spindle nose: 80~480mm Distance between pallet centre to column slideways: 120~520mm Pallet: Working area: 300 x 300mm Maximum load weight: 200kg Surface tapped hole (size x quantity): M12 x P1.75 x 32mm Table Table indexing angle: 1 degree Table indexing speed: 1.5 sec/90°, 1.9 sec/180° Coupling clamp force: 27.3kN Spindle Spindle bearing ID: Ø70mm Maximum spindle torque: 105/1000 minˉ1 Nm Tool clamp force: 8.2kN Spindle orientation: Standard (electric) Spindle air blow: Standard Feed Rate Cutting federate (X/Y/Z): 1~15000mm/min Manual continuous (jog) federate: 0~4000mm/min Least output increment: 0.001mm Automatic Tool Changer Pull stud type: JIS B 6339 pull stud 40P Tool storage: 30 pcs Method of tool selection: Addresses code & random selection bi-directional magazine rotation. (T4) Tool change time (tool to tool): 1.5 sec (less than 6kg), 2.0 sec (more than 6kg) Tool change time (chip to chip): 3.2 sec Tool pot pitch: 95.25mm Automatic Pallet Changer Number of pallets: 2 Pallet change system: Turn-table method Pallet change time: 8.5 sec Pallet change time (pallet to pallet): 9.0 sec Pallet clamp force: 41.5kN Pallet weight/piece: 40kg Pallet size: 300 x 300mm Maximum load weight: 200kg Motors Spindle motor: Alpha T8/1500 AC 11.0/7.5kW (30min./continuous rate) Feed motors: X Axis: model α 22/3000 AC 4.4kW Y Axis: model α 22/2000 with brake AC 4.4kW Z Axis: model α 22/3000 AC 4.4kW Hydraulic motor: AC 1.5kW Lubrication motor: AC 0.02kW Coolant motor: AC 0.75kW Required Power Capacity Total electric capacity: 34KVA Air source: 0.54~0.93MPa Air capacity: 400 L/min Hydraulic tank capacity: 15L Lubrication tank capacity: 2.7L Coolant tank capacity: 200L Standard Attachments Tool enclosure guard (with top cover) Chip flow Synchronized tap Spindle oil cooler Spindle overload protection Feed axis interface prevention device Work light (fluorescent light) M code counter (9 kinds) Through spindle coolant Spindle probe interface (no probe) Filtermist Swarf conveyor Manuals
Machine Benefits
Technical Machine Benefits
Extra Information