Index ABC metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Hamburg
Germany, Kunde
Germany, Bovenden
Germany, De-54516 Wittlich
Germany, Lemgo
Germany, De-84539 Ampfing
Germany, Kunde
Germany, Hamburg
Germany, Bottrop
Germany, De-48341 Altenberge
Germany, Hamburg
Germany, Bovenden
Germany, Saarlouis
Germany, Menslage
Germany, Hamburg
Germany, Hamburg
Germany, Hamburg
Germany, Bad Essen
Germany, Saarlouis
Main spindleCapacity variants (spindle clearance):30 (25): 30 mm (25 mm)42 (36): 42 mm (36 mm)60 (52): 60 mm (52 mm)65: 65 mmSpindle diameter in front bearing:75 mm (Model 30)85 mm (Model 42)100 mm (Models 60 & 65)Power Pmax at 100% duty:7 / 10 / 13 kW (Model 30)7.5 / 13 / 20 kW (Model 42)7.5 / 13 / 20 kW (Model 60)13 / 20 kW (Model 65)Power Pmax at 40% duty:10 / 15 / 21 kW (Model 30)13.3 / 21 / 29 kW (Models 42 & 60)21 / 29 kW (Model 65)Torque Mdmax at 100% duty:33 / 48 / 62 Nm (Model 30)35 / 62 / 95 Nm (Models 42 & 60)62 / 95 Nm (Model 65)Torque Mdmax at 40% duty:48 / 69 / 102 Nm (Model 30)64 / 102 / 140 Nm (Models 42 & 60)102 / 140 Nm (Model 65)Max speed:7500 rpm (Model 30)7000 rpm (Model 42)6000 rpm (Models 60 & 65)Clamping cylinder stroke:Collet clamping: 7 mmChuck and collet clamping: 20 mmClamping path monitoring: 140 mm (with Rev. 2) / 160 mm (without Rev. 2)Expansion stages:C-axis resolution: 0.001°Alignment/switching unit (indexing angle): 2.5°Workpiece stop and ejector unit: D 42 / D 60
Capacity variants (spindle clearance):30 (25): 30 mm (25 mm)42 (36): 42 mm (36 mm)60 (52): 60 mm (52 mm)65: 65 mm
30 (25): 30 mm (25 mm)
42 (36): 42 mm (36 mm)
60 (52): 60 mm (52 mm)
65: 65 mm
Spindle diameter in front bearing:75 mm (Model 30)85 mm (Model 42)100 mm (Models 60 & 65)
75 mm (Model 30)
85 mm (Model 42)
100 mm (Models 60 & 65)
Power Pmax at 100% duty:7 / 10 / 13 kW (Model 30)7.5 / 13 / 20 kW (Model 42)7.5 / 13 / 20 kW (Model 60)13 / 20 kW (Model 65)
7 / 10 / 13 kW (Model 30)
7.5 / 13 / 20 kW (Model 42)
7.5 / 13 / 20 kW (Model 60)
13 / 20 kW (Model 65)
Power Pmax at 40% duty:10 / 15 / 21 kW (Model 30)13.3 / 21 / 29 kW (Models 42 & 60)21 / 29 kW (Model 65)
10 / 15 / 21 kW (Model 30)
13.3 / 21 / 29 kW (Models 42 & 60)
21 / 29 kW (Model 65)
Torque Mdmax at 100% duty:33 / 48 / 62 Nm (Model 30)35 / 62 / 95 Nm (Models 42 & 60)62 / 95 Nm (Model 65)
33 / 48 / 62 Nm (Model 30)
35 / 62 / 95 Nm (Models 42 & 60)
62 / 95 Nm (Model 65)
Torque Mdmax at 40% duty:48 / 69 / 102 Nm (Model 30)64 / 102 / 140 Nm (Models 42 & 60)102 / 140 Nm (Model 65)
48 / 69 / 102 Nm (Model 30)
64 / 102 / 140 Nm (Models 42 & 60)
102 / 140 Nm (Model 65)
Max speed:7500 rpm (Model 30)7000 rpm (Model 42)6000 rpm (Models 60 & 65)
7500 rpm (Model 30)
7000 rpm (Model 42)
6000 rpm (Models 60 & 65)
Clamping cylinder stroke:Collet clamping: 7 mmChuck and collet clamping: 20 mm
Collet clamping: 7 mm
Chuck and collet clamping: 20 mm
Clamping path monitoring: 140 mm (with Rev. 2) / 160 mm (without Rev. 2)
Expansion stages:C-axis resolution: 0.001°Alignment/switching unit (indexing angle): 2.5°Workpiece stop and ejector unit: D 42 / D 60
C-axis resolution: 0.001°
Alignment/switching unit (indexing angle): 2.5°
Workpiece stop and ejector unit: D 42 / D 60
Tool carrier: Turret 1Slide travel: X 90 mm, Z 280 mmFeed force: 5500 N (X and Z)Rapid traverse: X 27 m/min, Z 36 m/minResolution: X 0.5 µm, Z 1.0 µmNumber of tools: 7 + synchronous spindleTool system: Cylindrical shank DIN 69 880 (25 x 48 mm)Switching time (one station): 0.3 sTool drive (all stations): 4.2 kW, 7.5 Nm, 6000 rpm (Pmax/Mdmax at 25% duty)
Slide travel: X 90 mm, Z 280 mm
Feed force: 5500 N (X and Z)
Rapid traverse: X 27 m/min, Z 36 m/min
Resolution: X 0.5 µm, Z 1.0 µm
Number of tools: 7 + synchronous spindle
Tool system: Cylindrical shank DIN 69 880 (25 x 48 mm)
Switching time (one station): 0.3 s
Tool drive (all stations): 4.2 kW, 7.5 Nm, 6000 rpm (Pmax/Mdmax at 25% duty)
Tool carrier: Turret 2Slide travel: X 81 mm, Z 80 mmFeed force: X 8300 N, Z 5500 NRapid traverse: X 27 m/min, Z 36 m/minResolution: X 0.5 µm, Z 1.0 µmNumber of tools: 6Tool system: Dovetail mount with cylindrical shank (25 x 40.3 mm)Switching time (one station): 0.3 sTool drive (all stations): 6.5 kW, 14 Nm, 4500 rpm (Pmax/Mdmax at 25% duty)Thread milling and polygon turning unit: max 6000 rpm (max 2 stations simultaneously)
Slide travel: X 81 mm, Z 80 mm
Feed force: X 8300 N, Z 5500 N
Rapid traverse: X 27 m/min, Z 36 m/min
Resolution: X 0.5 µm, Z 1.0 µm
Number of tools: 6
Tool system: Dovetail mount with cylindrical shank (25 x 40.3 mm)
Switching time (one station): 0.3 s
Tool drive (all stations): 6.5 kW, 14 Nm, 4500 rpm (Pmax/Mdmax at 25% duty)
Thread milling and polygon turning unit: max 6000 rpm (max 2 stations simultaneously)
Rear tool carrier (back-working)Slide travel: X 280 mm, Z 280 mmMax number of tools: 6Tool system: Dovetail mount
Slide travel: X 280 mm, Z 280 mm
Max number of tools: 6
Tool system: Dovetail mount
Back-boring unit (optional expansion)Max fixed tools: 5Max driven tools: 2Driven tools performance (at 25% duty): 4.5 kW, 8 Nm, 6000 rpmTool holder bore: 25 mm (DIN 69 880) / 1 inch
Max fixed tools: 5
Max driven tools: 2
Driven tools performance (at 25% duty): 4.5 kW, 8 Nm, 6000 rpm
Tool holder bore: 25 mm (DIN 69 880) / 1 inch
Material handling (integrated material feed unit)Bar diameter max: 52 mmAdjustable feed path max: 80 mmFeed force: 3000 N
Bar diameter max: 52 mm
Adjustable feed path max: 80 mm
Feed force: 3000 N
Fluids and systemsCoolant system: 60 (80) l/min, 5.5 (8) bar, tank 220 l; switchable pump max 18 bar, 20 l/minHydraulic system: 19 l/min, 90 bar, tank 50 l
Coolant system: 60 (80) l/min, 5.5 (8) bar, tank 220 l; switchable pump max 18 bar, 20 l/min
Hydraulic system: 19 l/min, 90 bar, tank 50 l
Dimensions (without loading magazine and chip conveyor)Floor area: 2.4 m²Spindle center height (above floor): 1010 mm
Floor area: 2.4 m²
Spindle center height (above floor): 1010 mm
Additional equipment
Bar loading magazine (bar feeder), models LM3200 / LM3700 / LM4200Bar length max: 3.2 m / 3.7 m / 4.2 mBar diameter range: 6–52 mm
Bar length max: 3.2 m / 3.7 m / 4.2 m
Bar diameter range: 6–52 mm
Chip conveyorType: Hinge type or scraper beltDischarge height: 840 mm
Type: Hinge type or scraper belt
Discharge height: 840 mm
application type: Turning
Location: Germany
machine type: Horizontal Turning Machine