Demag Ergotech System 250 - 1450 injection moulding machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
50 Hz
Germany, Location:stuttgart
Germany, Location:munich
Germany, Kaiserslautern
Germany, Location:stuttgart
Germany, Location:nuremberg
50 Hz
Germany, Location:stuttgart
Germany, Location:leipzig
50 Hz
Germany, Pullach
France, Bellignat
Germany, Kaiserslautern
Plastic machinery parts
Clamping unit:Clamping force: 2500 kN (holding force 2750 kN)Opening stroke max.: 675 mmTool/mold height: 330–710 mmClear tie-bar spacing: 630 × 630 mmMax. spacing of tool clamping plates: 950 × 950 mmMax. mold weight: 3300 kgEjector stroke: 200 mmEjector force: 80 kN (retraction force 35 kN)5-point double toggle lever, compact; oil-lubricated toggle levers with optimized pulsesSupport for moving platen; height-adjustable mold mounting platesInduction-hardened tie bars (4-fold), upper columns extendable3 mold opening/closing speeds; clamping force adjustable on IBEDHydraulic mold ejector; position measuring system for mold platesAutomatic mold cooling shutdown in case of malfunctions
Clamping force: 2500 kN (holding force 2750 kN)
Opening stroke max.: 675 mm
Tool/mold height: 330–710 mm
Clear tie-bar spacing: 630 × 630 mm
Max. spacing of tool clamping plates: 950 × 950 mm
Max. mold weight: 3300 kg
Ejector stroke: 200 mm
Ejector force: 80 kN (retraction force 35 kN)
5-point double toggle lever, compact; oil-lubricated toggle levers with optimized pulses
Support for moving platen; height-adjustable mold mounting plates
Induction-hardened tie bars (4-fold), upper columns extendable
3 mold opening/closing speeds; clamping force adjustable on IBED
Hydraulic mold ejector; position measuring system for mold plates
Automatic mold cooling shutdown in case of malfunctions
Injection unit:Injection unit: 1450Screw diameters: 50 / 60 / 70 mm (currently equipped: 70 mm)L/D ratio: 20:1 (all screw cylinders)Max. dosing stroke: 270 mmActive screw retraction system; hydraulic screw retraction after holding pressure or plasticizingSeparately heated cylinder zones; 5 self-optimizing temperature control loops (cylinder & nozzle)Speed control via 10 support points (polygon profile)Screw speed control via 6 stagesHolding pressure control: 10 stages (polygon profile)Injection via displacement measuring system (rapid/creep)Adjustable back pressure; cushion monitoring during holding pressure2 3-speed injection molding system; two-stage ejection speed
Injection unit: 1450
Screw diameters: 50 / 60 / 70 mm (currently equipped: 70 mm)
L/D ratio: 20:1 (all screw cylinders)
Max. dosing stroke: 270 mm
Active screw retraction system; hydraulic screw retraction after holding pressure or plasticizing
Separately heated cylinder zones; 5 self-optimizing temperature control loops (cylinder & nozzle)
Speed control via 10 support points (polygon profile)
Screw speed control via 6 stages
Holding pressure control: 10 stages (polygon profile)
Injection via displacement measuring system (rapid/creep)
Adjustable back pressure; cushion monitoring during holding pressure
2 3-speed injection molding system; two-stage ejection speed
Nozzle:Nozzle stroke max.: 440 mmNozzle immersion depth: 40 mmNozzle contact force: 110 kN
Nozzle stroke max.: 440 mm
Nozzle immersion depth: 40 mm
Nozzle contact force: 110 kN
Performance/data:Max. part weight (PS): 927 gFilling hopper capacity: 110 LOil tank capacity: 700 LPump unit: 37 / 45 kWElectrical connection: 380 V / 50 Hz
Max. part weight (PS): 927 g
Filling hopper capacity: 110 L
Oil tank capacity: 700 L
Pump unit: 37 / 45 kW
Electrical connection: 380 V / 50 Hz
Controls and HMI:Fully controlled injection molding machine; modular designEnergy-saving DFE hydraulic control pumpCylinder change system with automatic data conversionBuilt-in ramp function for mold opening/closingOperator terminal IBED with 10" LCD and 3.5" floppy disk driveSetpoint input in bar, cm³, mm/s, or %Graphic support for injection profilesPDE process data acquisition (20 parameters + 100 cycle graphs); process controlPlain text error diagnosticsProcess data transfer to other ERGOtech machinesOn/off program with ejection sprayingHelp function with diskette
Fully controlled injection molding machine; modular design
Energy-saving DFE hydraulic control pump
Cylinder change system with automatic data conversion
Built-in ramp function for mold opening/closing
Operator terminal IBED with 10" LCD and 3.5" floppy disk drive
Setpoint input in bar, cm³, mm/s, or %
Graphic support for injection profiles
PDE process data acquisition (20 parameters + 100 cycle graphs); process control
Plain text error diagnostics
Process data transfer to other ERGOtech machines
On/off program with ejection spraying
Help function with diskette
Interfaces and connections:EOAT/peripheral bus for device connectionV24 interface for hardcopy printer; printer program + hard copyHandling interface VDMA 24465 (32-pin)Tool protection interface (ejector plate lock)Tool connection DIN standardSocket combination:2× 220 V / 2× 380 V + automatic shut-off2× 220 V + 1× 380 V socket (SO)Pneumatic valves (3/2) for tool mounting plateCooling water control: 8-way (expandable to 12-way)Visual fault indicator (flashing light)
EOAT/peripheral bus for device connection
V24 interface for hardcopy printer; printer program + hard copy
Handling interface VDMA 24465 (32-pin)
Tool protection interface (ejector plate lock)
Tool connection DIN standard
Socket combination:2× 220 V / 2× 380 V + automatic shut-off2× 220 V + 1× 380 V socket (SO)
2× 220 V / 2× 380 V + automatic shut-off
2× 220 V + 1× 380 V socket (SO)
Pneumatic valves (3/2) for tool mounting plate
Cooling water control: 8-way (expandable to 12-way)
Visual fault indicator (flashing light)
Paint finish:Lower part anthracite; upper part blue/green/light gray
Lower part anthracite; upper part blue/green/light gray
Additional equipment
Sepro robot (handling)Horizontal cross-stroke X: total 3000 mm (X1 = 2580 mm / X2 = 420 mm)Drive: servo motorMax. travel speed: 4000 mm/sOutput side: rear of machineFixed base height approx.: 480 mm
Horizontal cross-stroke X: total 3000 mm (X1 = 2580 mm / X2 = 420 mm)
Drive: servo motor
Max. travel speed: 4000 mm/s
Output side: rear of machine
Fixed base height approx.: 480 mm
Material hopper
Temperature controller with graphical recording
Cooling water control unit: 8-way, expandable to 12-way
Resilient machine mounting (vibration-damping feet)
application type: Injection Moulding
Location: Switzerland
machine type: Hydraulic Injection Moulding Machine