Krauss Maffei 420-1400 CX injection moulding machine
Location:bucharest
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Manufacturer KRAUSSMAFFEI
Type 420-1400 CX
M. Year 2013
1 injection unit
Dimension(LxWxH) 6630x2600x2400
Injection molding machines are used for manufacturing parts from different plastics in a wide range of colors
shapes and sizes. Processing of thermosetting plastics involves transforming the initial material in the machine into a plastic state by heating it and injecting it under pressure into a closed shape (mold) and removing it from the mold after a cooling phase
Injection molding machine KM 35 CX
Clamping unit
Clamping force [kN] 350
Mold opening force [kN] 39.9
Clamping platen (h x v) [mm] 540 x 540
Clear width (h x v) [mm] 320 x 320
Mold opening stroke max. [mm] 350
Mold installation height min. [mm] 175
Opening width [mm] 525
Ejector stroke [mm] 100
Ejector force forward/back [kN] 22,6⁄9,8
Injection unit SP 55 SP 100
Screw diameter [mm] 15 18 20 22 20 22 25 28
Working capacity1)
1) International designation of quantity calculated from max. swept volume [cm3] x max. injection pressure [bar] divided by 1000
37 51 51 51 79 95 99 99
LS⁄D ratio 20,0 22.2 20,0 18.1 25.0 22,7 20,0 17.9
Injection pressure [bar] 2600 2500 2025 1674 2500 2500 2025 1614
Swept volume [cm3] 14 20 25 30 31 38 49 62
Shot weight
PS [g] 13 19 23 28 29 35 45 56
Injection flow [cm3
⁄s] 27 38 47 57 47 57 74 92
Installed heating capacity [kW] 2,65 3.78 3.78 3.78 6.30 6.30 6.30 6.30
Control zones
barrel heating show contacts
Nozzle contact force [kN] 50 50
Screw speed [rpm] 450 465
Plasticizing flow2)
2) Determined according to KraussMaffei factory standard
[g⁄s] 2.1 4.0 5.0 6.0 6.0 7.3 9.4 11,9
Electrohydraulic equipment 2)
Pump motor rated output
standard [kW] 11 11
Dry cycle time/stroke (according to Euromap 6) 3)
3) Stroke: 70% of horizontal clear width
clamping force: 70%
[s]/[mm] 1.2/224 1.2/224
Oil filling [l] 220 220
Dimensions and weights
Net weight4)
4) Deviating machine dimensions and weights depending on machine equipment
[t] 2.6 2.65
Length x width x height (without machine mounting) 4) [m] 3.6 x 1.45 x 1.95 3.6 x 1.45 x 1.95
Max. mold weight [kg] 430 430
Machine options
Increased mold installation height 4)
Mold installation height min. [mm] 275 275
Opening width at enlarged min. mold installation height [mm] 625 625
Reduced min. mold installation height
Mold installation height min. [mm] 125 125
Max. opening width at reduced min. mold installation height [mm] 475 475
Equipment controlled
Injection flow controlled [cm3
⁄s] 27 38 47 57 47 57 74 92
Pump motor rated output [kW] 11 11
Increased injection capacity (controlled) 4)
Injection flow with accumulator [cm3
⁄s] 53 76 94 114 94 114 147 185
Pump motor rated output (for version with pressure accumulator) [kW] 11 15
Screw drive options
Standard drive
equipment controlled: screw speed (rpm) [rpm] 450 465
Standard drive
equipment controlled: plasticizing flow
PS 2) [g⁄s] 2.1 4.0 5.0 6.0 6.0 7.3 9.4 11.9
Increased speed
standard equipment: screw speed [rpm] 540 560
Increased speed
standard equipment: plasticizing flow
PS 2) [g⁄s] 2.5 4.8 5.9 7.2 7.3 8.8 11.4 14.3
Increased speed
equipment controlled: screw speed [rpm] 540 560
Increased speed
equipment controlled: plasticizing flow
PS 2) [g⁄s] 2.5 4.8 5.9 7.2 7.3 8.8 11.4 14.3
Electric screw drive 4)
Screw drive power [kW]
Screw speed
nominal/max. [rpm]
Plasticizing flow at nominal speed
PS 2) [g⁄s]
Plasticizing flow at maximum speed
PS 2) [g/s]
Find more here
show contacts
Contact us at
show contacts