Homag PROFI BAZ20/30/16/V/D machining center for wood
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Pullach
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Location:dortmund
Machining center for wood parts
Location: DE
Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor
Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console
Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement)
Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm
Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis
Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis
Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel
Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm
Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes
WPL knife head: run-out angle 5°, Ø 70 mm
Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis
Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation
Connectivity: Ethernet network connection
Chip conveyor belt: Integrated chip/scrap disposal via chip belt below longitudinal crossbars
Vacuum pump: 100/140 m³/h
Workpiece capacity
Length 800–3000 mm
Width 350–1400 mm
Thickness max. 70 mm with edge / 80 mm milling
Frieze width min. 120 mm
Weight max. 150 kg
Table/Clamping
Continuous table (D-table)
Longitudinal console 1 fixed
Longitudinal console 2 manual Y-width adjustment
8 vacuum clamps 125 x 50 x 100 mm
Working height lower edge of workpiece 950 mm
Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console)
Main spindle
Speed 1500–18000 rpm (VFD 15 kW)
full rated power from 12000 rpm
Tool diameter max. 180 mm (milling) / 200 mm (grinding)
Room extraction for all tools/units
Aggregate interface/C-axis
Pneumatic and swivel drive interface
C-axis with torque drive and 3-point support
Tool changer
18-position disk changer for HSK F63
tool weight 6 kg
tool length max. 200 mm
Changer raisable for traveling pickup (left side)
Units/aggregates (for tool changer unless noted)
Gluing/edgebanding equipment
Edge hold-down device
manual adjustment
Magazine/pickup
Pickup space on X-support for interchangeable special unit (e.g
motor-driven swiveling machining spindle)
Additional equipment
External pre-chopping station with 3-stage roller
automatic
Roller turntable on operator side
roller Ø 800 mm
Edge length min. 350 mm
edge height max. 90 mm
Residual edge length monitoring with feed stop at 2400 mm