Zimmerli / IDAG Druckregler ZM-B25H-FD-P010808/V/S for industrial equipment
≈ US$349
Grenzach-Wyhlen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7624 98...
Show
+49 7624 9889756
+49 170 81...
Show
+49 170 8106758
Germany 
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Installation type: Horizontal (according to nameplate)
* Input pressure (operating range): 15–100 mbar
* Stuff: stainless steel
Starting pressure: atmospheric (pressureless, open)
* Connections: Flange connection (DIN-compatible)
* Type: ZM-B25H-FD-P010808/V/S
* Serial number: B3 1055
* Kv value: 6,5
* Type of connection: Flange connections with standardized hole pattern
* Design: Membrane valve, pressure relief via spring-membrane system
* Condition: used, technically flawless
The Zimmerli ZM-B25H-FD-P010808/V/S is a precise and robust overflow valve for pressure relief in horizontal installation in low- to medium-pressure systems. It protects system components by relieving excess medium to ambient pressure once a certain prepressure is reached.
The system consists of the parts shown in the pictures. The valve is used, technically tested and fully functional – ideal for industrial applications with safety requirements.
Advantages:
- Flexible range of application: 15–100 mbar prepressure
- Stainless steel housing: Suitable for corrosive, hygienic, or sensitive media
- Compact flange design: Easily integrable into existing pipelines
- Horizontal installation: Optimized for space-critical mounting systems
- Sustainability including: CO2 reduction through reuse
---------------------------------------------------------------
2. General functions
- Valve type: overflow valve / pressure relief valve
- Installation type: Horizontal (according to nameplate)
- Input pressure (operating range): 15–100 mbar
- Starting pressure: atmospheric (pressureless, open)
- Kv value: 6.5 m³/h – suitable for high flow
- Material: stainless steel
- Connections: Flange connection (DIN-compatible)
- Use: Protection of measuring devices, systems and control circuits against overpressure
- Suitable for: Gases, biogas, air, neutral media
- Assembly: Horizontal according to factory specification
---------------------------------------------------------------
3. CO₂ savings
By reusing this high-quality stainless steel overflow valve, approximately 300–500 kg CO₂ saved.
This corresponds to roughly the CO₂ emissions of a vehicle on 2,000–4,000 km driving distance.
Technology that protects – also the climate.
---------------------------------------------------------------
4. Device details (type plate data in German)
- Manufacturer: Zimmerli / IDAG pressure regulator
- Type: ZM-B25H-FD-P010808/V/S
- Manufacturing number: B3 1055
- Kv value: 6,5
- Input Pressure: 15–100 mbar (only horizontal installation according to the nameplate)
- Starting pressure: atmospheric (pressureless)
- Material: Stainless steel (probably 1.4571 / V4A)
- Connection type: Flange connections with standardized hole pattern
- Design: Membrane valve, pressure relief via spring-membrane system
- Condition: used, technically perfect
* Einbauart: Horizontal (gemäß Typenschild)
* Eingangsdruck (Arbeitsbereich): 15–100 mbar
* Material: Edelstahl
* Ausgangsdruck: atmosphärisch (drucklos, offen)
* Anschlüsse: Flanschanschluss (DIN-kompatibel)
* Typ: ZM-B25H-FD-P010808/V/S
* Fabrikationsnummer: B3 1055
* Kv-Wert: 6,5
* Anschlussart: Flanschanschlüsse mit genormtem Lochbild
* Bauform: Membranventil, Druckentlastung über Feder-Membran-System
* Zustand: gebraucht, technisch einwandfrei
Das Zimmerli ZM-B25H-FD-P010808/V/S ist ein präzises und robustes Überströmventil zur Druckentlastung bei horizontalem Einbau in Nieder- bis Mitteldrucksystemen. Es schützt Anlagenkomponenten, indem es bei Erreichen eines bestimmten Vordrucks überschüssiges Medium gegen Atmosphärendruck entlastet.
Die Anlage besteht aus den Teilen, die in den Bildern zu sehen sind. Das Ventil ist gebraucht, technisch geprüft und voll funktionsfähig – ideal für industrielle Anwendungen mit Sicherheitsanforderungen.
Vorteile:
- Flexibler Einsatzbereich: 15–100 mbar Vordruck
- Edelstahlgehäuse: Geeignet für korrosive, hygienische oder sensible Medien
- Kompakte Flanschausführung: Einfach integrierbar in bestehende Rohrleitungen
- Horizontaler Einbau: Optimiert für Systeme mit platzkritischer Montage
- Nachhaltigkeit inklusive: CO₂-Reduktion durch Wiederverwendung
---------------------------------------------------------------
2. Allgemeine Funktionen
- Ventiltyp: Überströmventil / Druckbegrenzungsventil
- Einbauart: Horizontal (gemäß Typenschild)
- Eingangsdruck (Arbeitsbereich): 15–100 mbar
- Ausgangsdruck: atmosphärisch (drucklos, offen)
- Kv-Wert: 6,5 m³/h – für hohen Durchfluss geeignet
- Material: Edelstahl
- Anschlüsse: Flanschanschluss (DIN-kompatibel)
- Verwendung: Schutz von Messgeräten, Anlagen und Regelstrecken bei Überdruck
- Geeignet für: Gase, Biogas, Luft, neutrale Medien
- Montage: Horizontal gemäß Werksvorgabe
---------------------------------------------------------------
3. CO₂-Einsparung
Durch die Wiederverwendung dieses hochwertigen Edelstahl-Überströmventils werden ca. 300–500 kg CO₂ eingespart.
Dies entspricht etwa dem CO₂-Ausstoß eines Fahrzeugs auf 2.000–4.000 km Fahrstrecke.
Technik, die schützt – auch das Klima.
---------------------------------------------------------------
4. Gerätedetails (Typenschilddaten auf Deutsch)
- Hersteller: Zimmerli / IDAG Druckregler
- Typ: ZM-B25H-FD-P010808/V/S
- Fabrikationsnummer: B3 1055
- Kv-Wert: 6,5
- Eingangsdruck: 15–100 mbar (nur horizontaler Einbau laut Typenschild)
- Ausgangsdruck: atmosphärisch (drucklos)
- Material: Edelstahl (vermutlich 1.4571 / V4A)
- Anschlussart: Flanschanschlüsse mit genormtem Lochbild
- Bauform: Membranventil, Druckentlastung über Feder-Membran-System
- Zustand: gebraucht, technisch einwandfrei